Project progress work #8
closed
Parent project #560: [PJ230033]Label printing system concept1
Support installation for power supply and LAN cable for 50 points
Added by Arunwit Isarapongporn about 2 years ago.
Updated over 1 year ago.
Description
Support installation for power supply and LAN cable for 50 points
- Control and coordinate between wiring or LAN installers and site supervisors at the installation plant.
- Config IP address of label printer and install in chip room
- Config access point for 4 points
- Install and config server of label print system
Files
- Status changed from New to In Progress
- % Done changed from 0 to 30
today install 10 position
and tomorrow install 10point
- Subject changed from Support installation for power supply and LAN cable for 70 points to Support installation for power supply and LAN cable for 50 points
- Description updated (diff)
- % Done changed from 30 to 40
Install power plugs and LAN connections in chip room for 50 point
- Install the electrical cabinet and electrical rail in the Chip room and connect the wires.
- Install the LAN cable connection point and powerplug with wires, complete 35 points
- Wiring the power cable and LAN cable above the ceiling to the powerplug point and LAN connection point.
- Config IP address for 10 label printers
- Install the electrical cabinet and electrical rail in the Chip room and connect the wires.
- Install the LAN cabinet and LAN rail in the Chip room and connect the LAN cable.
- Install the LAN cable connection point and powerplug with wires, complete 15 points
- Wiring the power cable and LAN cable above the ceiling to the powerplug point and LAN connection point.
19/10/2023
- The power distribution cabinet and lag hub cabinet have been installed and connected to the Network.
- Electrical wires and LAN cable connections are complete at every point of the machine.
- Completed installation and config of 32 printers, remaining 18 to install.
- Labels have been attached to all LAN cables and printers.
- Keep all wires and LAN cables from the ceiling down.
20/20/2023
- Today I will install 18 more printers and finish configuring all printers.
- Config Handy with Access point
- Finish date changed from 16 Oct 2023 to 24 Oct 2023
[24/10/23]
-Setup IP address and setting application for all remaining Handy terminal devices.
-The setup printer name and IP address is complete on all machines.
-Label the names of all printers.
-Silicone to keep the gaps on the side of the power cabinet and LAN cabinet.
-Test the operation of the entire system.
Today
-Test & User training
Add document Infrastructure settings list_R1.xlsx
- Status changed from In Progress to Closed
- Project changed from 30 to Asian Stanley. International Limited
- Parent task set to #560
Also available in: Atom
PDF